Forged Slip On Pipe Flanges Nickel Alloy Stainless Steel Flanged
Size 1/2'-24'
Slip-on Flanges
BOYUE Slip-on flanges are a popular type of pipe flanges. These are
type of flanges that slide over the end of piping and then welded
in place. These flanges are ideal for lower pressure applications.
These are easily fitted and welded into different pipes. Welding
reduces fabrication costs of these pipes. These are available in
wide variety of sizes and applications.
Product Range-
Size : 1/8" NB TO 48"NB.
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.
Stainless Steel Slip on Flanges: ASTM A 182, A 240
Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317,
347, 347H,904L, Duplex stainless steel UNS S31803, 2205, Super
Duplex stainless steel UNS S32750
Carbon Steel Slip on Flanges : ASTM A 105, ASTM A 181
Alloy Steel Slip on Flanges: ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys Slip on Flanges : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy
C22,C276
Copper Alloys Slip on Flanges : Copper, Brass & Gunmetal
Slip on Flanges Standard
ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655,
DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633,
DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673
Why slip on flanges are preferred to welding neck flanges?
For many users, slip on flanges continue to be preferred to welding
neck flanges because of the following reasons:
· On account of their initially lower cost.
· The reduced accuracy needed in cutting the pipe to length.
· The greater ease of alignment of the assembly.
· The calculated strength of slip-on flanges under internal
pressure is approximately two-thirds that of welding neck flanges.
BOYUE GROUP deal with Austenitic Stainless Steel, Nickel Alloy Steel(Hastelloy
, Monel, Inconel, Incoloy ) , Copper Nickel alloy products (pipe,
fitting, flange) already more than 25 years, every year sell more
than 50000 tons of steel pipe and tube, and also supply millions
fittings and flange.
Our client already cover more than 45 countries, Like Italy, UK,
Gernmany, USA, Canada, Chile, Colombia, Saudi Arabia, Russia,
Korea, Singapore, Austrial, Poland, France , ....And our group
branch company and factory have been already approved by :ABS, DNV, GL, BV, PED 97/23/EC, AD2000-WO, GOST9941-81, CCS, TS,
CNNC, ISO9001-2015, ISO 14001, ISO 18001,...
Based on NORSOK L005 code, suitable for critical sealing
applications with high thermal expansion, cyclic loading such as
Risers, single point mooring systems, manifolds, X-Trees, subsea
pipelines, heat exchangers and a multitude of process piping
systems.
- RCF Advantage
- Space saving
- Weight saving up to 70%~80% than ANSI flanges
- Double Independent Seals make it er
- Integrated sealing system (both inside and outside)
- Larger range in design temperature and pressure
- RCF Working Principle
- The RCF compact flange design principle is that the flange face
includes two independent seals. The first seal is created by
application of seal seating stress at the flange heel. The main
seal is the IX seal ring. The seal ring force is provided by the
elastic stored energy in the stressed seal ring. Any heel leakage
will give internal pressure acting on the seal ring inside
intensifying the sealing action.RCF Size and Pressure Rating
- 1/2”~48” in size and Class 150# to 2500# in pressure rating.
- Bigger size and higher pressure rating on request.
- RCF Materials
- ASTM A105, A350 LF2, LF6, A694 F52~F70
- AISI 4130, AISI 8630
- A182 F316/316L, F51, F53, F55, Inconel 625, Incoloy 825.
- Other material on request
- RCF Gasket
- RCF IX seal ring, axial forces are exerted on the taper of the
metal seal ring and translated into a radial sealing force.
Furthermore with increased pre-load, the bevel is closed and face
to face contact is achieved at the outer wedge while most of the
bolt pre-load is transferred as compressive forces between the
flange faces at the heel.
- RCF Design and Verification Applications of pipe flanges:
- boyue Special Steel provides calculation service based on ASME
section VIII Division 1, 2 and 3. Also we have ANSYS software
engineers to do the analysis and design verificatio
Pipe flanges are widely used in pipe fittings of various
industrial, commercial and residential applications. Pipe flanges
can be customized to suit your application with various machining
details. These pipe flanges have been used extensively in:
- Hydraulic control systems for turbine generators
- High pressure ground support missile systems
- Nuclear and conventional power plant applications etc.
| Place of Origin | China | Brand Name | BOYUE |
| Standard | ANSI, ISO, ASME, DIN, ASTM | Type | SW/WN/SO/BL/TH Flanges |
| ModelNumber | Steel Flange | Thickness | #150,#300,#600,.#900,#1500,#2500 |
| Packing | Ply-Wood Cases | Payment | 30%TT+70% Balance |
Supply Ability:40000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's
requirement.
Port:Shanghai/Tianjin
Commerce Clause
| Minimum Order Quantity: | 1pcs |
| Price: | Depending on quantity |
| Payment Terms: | T/T or Western Union or LC |
| Supply Ability: | 40000pcs per month |
| Delivery Time: | 10-100 days depending on quantity |
| Packaging Details: | PLY-WOODEN CASE OR PALLET |
Why Choose Us
1. One-Stop Service,One Single Source.
2. No MOQ.
3. Best quality,competitive price
4. Fast Reply.
5. On-Time Delivery
6. Professional sales and technical team .
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing
of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce
based on your drawings.
Q3: Will my drawing be e after you get it?
A3: Yes, we will not release your design to third party unless with
your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to
ensure quality standard, but it’s charged according to your
drawing.
