ASTM Annealed ASTM A269 TP304 Stainless Steel Seamless Tube Pickled
, Solid
BOYUEGroup has more than 26 years experience for heat exchanger tube / boiler
tube/ cooling tube,
Our main products: Stainless/Duplex/Nickel Alloy Pipe/Tube:
1>.A:Stainless Steel Grade: TP304/304L/304H, TP310S/310H,
TP316/316L/316Ti/316H, TP317L/317LN, TP321/321H, TP347/347H,
NO8904(904L),
B:PH Stainless Steel:17-4PH(1.4542), 17-7PH(1.4568),15-7PH(1.4532)
C:Duplex Steel Grade: S31803(2205), S32750(2507), S32760, S32304,
S32101, S31254(254Mo), 235Ma, UNS NO8926, NO8367.
D:Nickel Alloy Steel Grade:
Hestalloy:C-276, C-4, C-22, C-2000, X, B-2, B-3, G-30, G-35.
Monel:400,401, 404, R-405, K500.
Inconel:600, 601, 617, 625, 690, 718, 740, X-750.
Incoloy:800, 800H, 800HT, 825, 840.
Pure Nickel:Ni-200, Ni-201, Ni-270.
NS Alloy:Ns 1101, NS1102, NS1103,NS3105.
2>.Standards: ASTM A213, A249, A269, A312, A789,A790, B163,B167,
B444, B677,... and ASME,DIN, EN, JIS, BS, GOST,...
3>.Out diameter sizes range: 0.5mm~650mm. Wall
thickness:0.05mm~60mm. Max. length under 26 meters/PC.
4>.Seamless & welded, Solution Pickling/Bright Annealed /
Polished.
Advantage Products: (Boiler & Heat Exchanger & Condenser Tube):
ASTM A213(TP304,TP304L,TP304H,TP310S,TP316L,TP316Ti, TP317/L,
TP321/H, TP347/H)
ASTM A249(TP304,TP304L,TP316L, TP321/H)
ASTM A789(S31803(2205), 32750(2507), S31254(254MO),S32304)
ASTM B163/B167/B444 for Nickel Alloy Steel Tube
ASTM B677 UNS NO8904(904L)
ASTM B111(70400, C70600, C71500, C71640, C68700, C44300)
Other Standard: EN10216-5, DIN 17456, DIN17458, GOST9941-81,
JIS-G3459, JIS-G3463
Grade | Material
number | C | Si | Mn | P | S | N | Cr | Mo | Ni | Ti | others |
Ferritic or martensitic steels |
X2CrTi12 | 1.4512 |  0.030
| 1.00 | 1.00 | 0.040 | 0.015 |
| 10.50to12.50 |
|
| 6×(C+N)to0.65 |
|
X6CrAl13 | 1.4002 |  0.08
| 1.00 | 1.00 | 0.040 | 0.015 |
| 12.00to14.00 |
|
|
| 0.10to0.30Al |
X6Cr17 | 1.4016 |  0.08
| 1.00 | 1.00 | 0.040 | 0.015 |
| 16.00to18.00 |
|
|
|
|
X3CrTi17 | 1.4510 |  0.05
| 1.00 | 1.00 | 0.040 | 0.015 |
| 16.00to18.00 |
|
| 4×(C+N)+0.15 to 0.80 |
|
X12Cr13 | 1.4006 | 0.08 to 0.15 | 1.00 | 1.50 | 0.040 | 0.015 |
| 11.50to13.50 |
|  0.75
|
|
|
Austenitic steels |
X5CrNi18-10 | 1.4301 |  0.07
| 1.00 | 2.00 | 0.045 | 0.015 |  0.11
| 17.00to19.50 |
| 8.00to10.50 |
|
|
X2CrNi19-11 | 1.4306 |  0.030
| 1.00 | 2.00 | 0.045 | 0.015 |  0.11
| 18.00to20.00 |
| 10.00to12.00 |
|
|
X2CrNiN18-10 | 1.4311 |  0.030
| 1.00 | 2.00 | 0.045 | 0.015 | 0.12to0.22 | 17.00to19.50 |
| 8.50to11.50 |
|
|
X6CrNiTi18-10 | 1.4541 |  0.08
| 1.00 | 2.00 | 0.045 | 0.015 |
| 17.00to19.00 |
| 9.00to12.00 | 5×C to 0.70 |
|
X6CrNiNb18-10 | 1.4550 |  0.08
| 1.00 | 2.00 | 0.045 | 0.015 |
| 17.00to19.00 |
| 9.00to12.00 |
| 10×Cto1.00Nb |
X5CrNiMo17-12-2 | 1.4401 |  0.07
| 1.00 | 2.00 | 0.045 | 0.015 |  0.11
| 16.50to18.50 | 2.00to2.50 | 10.00to13.00 |
|
|
X2CrNiMo17-12-2 | 1.4404 |  0.030
| 1.00 | 2.00 | 0.045 | 0.015 |  0.11
| 16.50to18.50 | 2.00to2.50 | 10.00to13.00 |
|
|
X6CrNiMoTi17-12-2 | 1.4571 |  0.08
| 1.00 | 2.00 | 0.045 | 0.015 |
| 16.50to18.50 | 2.00to2.50 | 10.50to13.50 | 5×C to 0.70 |
|
X2CrNiMoN17-13-3 | 1.4429 |  0.030
| 1.00 | 2.00 | 0.045 | 0.015 | 0.12to0.22 | 16.50to18.50 | 2.50to3.00 | 11.00to14.00 |
|
|
X2CrNiMo18-14-3 | 1.4435 |  0.030
| 1.00 | 2.00 | 0.045 | 0.015 |  0.11
| 17.00to19.00 | 2.50to3.00 | 12.50to15.00 |
|
|
X3CrNiMo17-13-3 | 1.4436 |  0.05
| 1.00 | 2.00 | 0.045 | 0.015 |  0.11
| 16.50to18.50 | 2.50to3.00 | 10.50to13.00 |
|
|
X2CrNiMoN17-13-5 | 1.4439 |  0.030
| 1.00 | 2.00 | 0.045 | 0.015 | 0.12to0.22 | 16.50to18.50 | 4.00to5.00 | 12.50to14.50 | | |
Specification:
ASME SA213/A213: Standard Specification for Seamless Ferritic and
Austenitic Alloy-
Steel Boiler, Superheater and Stainless Steel Heat Exchanger Tubes.
ASTM A249 / A249M:Standard Specification for Welded Austenitic
Steel Boiler, SuperheaterHeat-Exchanger, and Condenser Tubes.
Other Standard:DIN 17456 , DIN 17458, EN10216-5, GOST 9940-81, GOST
9941-81, JIS-G3463,...
Material Grade:
| American Standard | Austenitic Steel: TP304,TP304L,TP304H, TP304N, TP310S,TP316,TP316L,TP316Ti,TP316H,
TP317,TP317L, TP321, TP321H,TP347, TP347H,904L… Duplex Steel : S32101,S32205,S31803,S32304,S32750, S32760 Others:TP405,TP409, TP410, TP430, TP439,... |
| Europen Standard | 1.4301,1.4307,1.4948,1.4541,1.4878,1.4550,1.4401,1.4404,1.4571,1.4438,
1.4841,1.4845,1.4539,1.4162, 1.4462, 1.4362, 1.4410, 1.4501 |
| Russia Standard | 08Х17Т,08Х13,12Х13,12Х17,15Х25Т,04Х18Н10,08Х20Н14С2,
08Х18Н12Б,10Х17Н13М2Т,10Х23Н18,08Х18Н10,08Х18Н10Т,
08Х18Н12Т,08Х17Н15М3Т,12Х18Н10Т,12Х18Н12Т,12Х18Н9, 17Х18Н9,
08Х22Н6Т, 06ХН28МДТ |
Size Range:
| Production | Outside Diameter | Wall Thickness |
| Heat Exchanger Tube | 6.00mm to 101.6mm | 0.5mm to 8mm |
Final Finishing
Solution Annealed & Pickled/Bright Annealed.
Type of Tubes:
U-bend & Straight.
Place of Origin | China | Brand Name | BOYUE |
| Standard | ANSI, ISO, ASME, DIN, ASTM | Type | Seamless |
| ModelNumber | Seamless Steel Pipe | Thickness | SCH 5-SCH XXS |
| Packing | Depending on customer | Payment | 30%TT+70% Balance |
Supply Ability:40000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's
requirement.
Port:Shanghai/Tianjin
Commerce Clause
| Minimum Order Quantity: | 1pcs |
| Price: | Depending on quantity |
| Payment Terms: | T/T or Western Union or LC |
| Supply Ability: | 40000 ton per month |
| Delivery Time: | 10-100 days depending on quantity |
| Packaging Details: | Depending on customer |
Why Choose Us
1. One-Stop Service,One Single Source.
2. No MOQ.
3. Best quality,competitive price
4. Fast Reply.
5. On-Time Delivery
6. Professional sales and technical team .
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing
of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce
based on your drawings.
Q3: Will my drawing be e after you get it?
A3: Yes, we will not release your design to third party unless with
your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to
ensure quality standard, but it’s charged according to your
drawing.
