ASTM 321 Stainless steel Lap Joint Flange Size 8' SCHXXS FORGED For
Oil SGS BV ISO
BOYUE GROUP has been doing OEM job for many reputable companies for many
years, which makes the best guaranty for Zhiyou technical
advantages with precise design. BOYUE GROUP Marine& Offshore is
designed according to ABS CCS BV LR DNV NK KR etc standard.In line
with the responsibility spirit for customers, we try to satisfy the
standards and the customers’ requirement in the process of
designing and
manufacturing process, as well as fully consider the basic cost.
The products we providing will
guarantee the quality and reasonable price, which ensure our
cooperated customers can get the
maximum value and minimum cost.
ANSI B16.5, ASME B16.47 FLANGE
Size range: 1/2" to 80" DN15 to DN2000
Design: welding neck, slip on, blind, socket welding, threaded, lap-joint
Pressure: 150#, 300#, 600#,900#,1500#, 2500#
Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS
Material: carbon steel A105, stainless steel 304/304L, 316/316L
Coating: black paint, yellow transparent paint, cold and hot dip galvanize
Package: seaworthy plywood case, wooden pallet
REMARK:
Materials. Most standards specify the material from which the
flange is produced. The purchaser should specify the exact
requirements.
Flange Sizes. All sizes and grades compatible to standard pipe
ranges and wall thicknesses(pressure ratings) are available.
Flange Face. There are various face configurations for flanges.
Typically: flat face,raised face, tongue and groove, ring joint.
Face Finish. The finish on the face of a flange is measured as an
Arithmetical Average Roughness Height (AARH).
The finish is determined by thestandard used.
For example, ANSI B16.5 specifies face finishes within a range
125AARH -500AARH (3.2Ra to 12.5Ra). Other finishes areavailable on
request, for example 1.6Ra max,1.6/3.2Ra, 3.2/6.3Ra or 6.3/12.5Ra.
The range3.2/6.3Ra is common size.
General Information:
Flange is a method of connecting pipes, valves, pumps and other
equipment to form apipework system. It also provides easy access
for cleaning, inspection or modification.Flanges are usually welded
or screwed into such systems and then joined with bolts.
Payment : By T/T(30% deposit T/T in advance, balance 70% cleared
out before delivery) or
Irrevocable L/C at sight
Incoterm: EXW/FCA/FOB, C&F/CIF
Package: Pallet with film packing or according to customer's
requirement
Lead time : Within one month for one 20'GP
Shipment : 20'GP, 40'GP,40'HQ, 40'OT or in bulk
Materials. Most standards specify the material from which the
flange is produced. The purchaser should specify the exact
requirements.
Flange Sizes. All sizes and grades compatible to standard pipe
ranges and wall thicknesses(pressure ratings) are available.
Flange Face. There are various face configurations for flanges.
Typically: flat face,raised face, tongue and groove, ring joint.
Face Finish. The finish on the face of a flange is measured as an
Arithmetical Average Roughness Height (AARH). The finish is
determined by thestandard used. For example, ANSI B16.5 specifies
face finishes within a range 125AARH -500AARH (3.2Ra to 12.5Ra).
Other finishes areavailable on request, for example 1.6Ra
max,1.6/3.2Ra, 3.2/6.3Ra or 6.3/12.5Ra. The range3.2/6.3Ra is
common size.
1) Punctual delivery:
• We put your order into our tight production schedule, keep our
client informed about production process, ensure your punctual
delivery time.
• Shipping notice/ insurance to you as soon as your order is
shipped.
2) Services after sales:
• An reasonable solution and/or response to any inquiry shall be
provided within 24hrs upon receipt of it.
• Terms and conditions of warranty shall be strictly abide by.
• Maintenance service shall be provided accordingly
3) Professional design and efficient solution:
• Our experienced engineers and experts guaranteed our customer
with satisfactory design & solution
• Rich experiences in various bids assistance including documentary
support
• Efficient solution providing through our professional designer
and technical supporter
Product Range: All marine outfittings, equipments and facilities
etc
Product Design: With strong engineer team, for all marine products,
we support design, manufacture,
install etc, according to your requirements. All products strictly
conform to your confirmation.
Product Process: Most of products are finished in our own
manufacture bases, thus quality and delivery
time could ely guaranteed and also avoid indirect troubles
Product Inspection: Double inspection make sure quality guaranteed
completely.
OUR PRODUCT RANGE
| 1 | Marine door | Watertight | Fireproof | Quick action | Weather tight | Airtight&Sound-reduction | Hydraulic Watertight | Hollow Cabin Door |
| 2 | Marine windows | Fixed | Skylight | Porthole | Sliding | Watertight | Fireproof | Louver& Cabin Shutters |
| 3 | Hatch cover& man hole | Sliding | Watertight Manhole Cover | Bolted watertight | Suez Canal Light | Quick action | Type A B C D | Rotating Oil tight |
| 4 | Mooring component | Marine bollards | Fairlead | Mooring roller | Mooring chock | | | |
| 5 | Marine steel product | Seamless steel Pipe | Seam steel pipe | Marine crane | Marine Stern Roller | Marine fender rubber cylinder | Steel structure | API pipe |
| 6 | Marine propeller& shaft | Rudder System | propeller | Rudder shaft sealing component | Rudder blade | Rudder carrier bearing | Rudder stock/pintle sealing apparatus | Fin stabilizer |
| 7 | Marine deck equipment | Mooring winch | Crane | Windlass | Capstan | Rope Guider | Cable lifter | |
| 8 | Rubber elements | Rubber fenders | Pneumatic fender | Ship launching airbag | Rubber sealing strip | Quay fenders | Drain airbag | |
| 9 | Pressure vessel tank | Anti- Corrosion pressure | Fermentation tank | Low temperature pressure | Compressor air tank | Oil& LPG tank | Vacuum tank | Foam buffer tank |
| 10 | Marine boarding ladder& gangplank | Boarding ladder | Draft ladder | Lifesaving ladder | Vertical access ladders | Embarkation ladder | Accommodation ladder | Gangplank |
| 11 | Welding material | E 6013 | E 7018 | E 7024 | E 7018-1 | E 308L-16 | E 347L-16 | E 309L-16 |
| 12 | Metal Processing Machinery Parts | Machinery Parts or fittings can be designed as your drawings or
detailed requirements, and processed by lathes, milling machines,
planing machines, drills. |
Product Attribute
| Place of Origin | China | Brand Name | BOYUE |
| Standard | ASME B16.5 | Type | lap joint flange |
| Material | Carbon Steel/Stainless Steel/Alloy Steel | Thickness | #150,#300,#600.#900 |
| Packing | Ply-Wood Cases | Payment | 30%TT+70% Balance |
Supply Ability:40000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's
requirement.
Port:Shanghai/Tianjin
Commerce Clause
| Minimum Order Quantity: | 1pcs |
| Price: | Depending on quantity |
| Payment Terms: | T/T or Western Union or LC |
| Supply Ability: | 40000pcs per month |
| Delivery Time: | 10-100 days depending on quantity |
| Packaging Details: | PLY-WOODEN CASE OR PALLET |
Why Choose Us
1. One-Stop Service,One Single Source.
2. No MOQ.
3. Best quality,competitive price
4. Fast Reply.
5. On-Time Delivery
6. Professional sales and technical team .
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing
of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce
based on your drawings.
Q3: Will my drawing be e after you get it?
A3: Yes, we will not release your design to third party unless with
your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to
ensure quality standard, but it’s charged according to your
drawing.
